Collection

12V 2A power adapter (5.5 x 2.1 mm)

Mains adapter 230V to 12V DC 2A with 5.5 x 2.1 mm plug. Suitable for relay modules, LED strips and 12V electronic locks.

€0,00

0.96 inch OLED display I2C 128x64

Small 0.96 inch OLED display (128x64 pixels, white) with I2C interface. Works at 3.3-5V with Arduino, ESP32 and Raspberr

€0,00

HC-SR04 ultrasonic distance sensor

Ultrasonic distance sensor with 2 to 400 cm range, 5V. Widely used for robots and parking sensors with Arduino and ESP32

€0,00

5V relay module 4-channel

Relay module with 4 channels (5V, opto-isolated), switches up to 250V AC / 10A per channel. Controllable from Arduino, E

€0,00

DHT22 temperature and humidity sensor

Digital DHT22 (AM2302) sensor for temperature (-40 to 80 °C) and humidity (0-100%). Works at 3.3-5V with Arduino, ESP32

€0,00

ESP32 DevKit V1 (WiFi + Bluetooth)

ESP32 development board with dual-core processor, WiFi and Bluetooth, 30 pins, micro-USB. Programmable with Arduino IDE

€0,00

Desoldering pump aluminium

Aluminium desoldering pump (solder sucker) with heat-resistant tip to remove solder from PCBs. Essential for repairs.

€0,00

Helping hands with magnifier and LED

Helping hands with two clips, 2.5x magnifier with LED lighting and soldering iron holder. Handy when soldering small PCB

€0,00

Soldering tips set 10 pcs (900M)

Set of 10 replacement soldering tips type 900M in various shapes (conical, chisel, bevel). Fits the 60W soldering statio

€0,00

Solder wire 0.8 mm 100 g lead-free

Lead-free solder wire Sn99.3/Cu0.7 with rosin core, 0.8 mm, 100 gram reel. Suitable for electronics and PCBs.

€0,00

Soldering station 60W digital adjustable

60W digital soldering station with adjustable temperature (200-480 °C), LED display and ceramic heating element. Include

€0,00

USB-C cable 1 m (data + charging)

USB-A to USB-C cable, 1 metre, for data and power. Fits the Arduino Uno R4 and most ESP32 boards.

€0,00

Sensor starter kit 37-in-1 for Arduino

Kit with 37 different sensor modules (temperature, light, sound, hall, tilt, joystick, etc.) for Arduino and ESP32. Conn

€0,00

Jumper wire set 120 pcs (M-M, M-F, F-F)

Set of 120 dupont jumper wires, 20 cm: 40x male-male, 40x male-female and 40x female-female. For breadboards and GPIO he

€0,00

Breadboard 830 tie-points

Solderless breadboard with 830 tie-points and two power rails. Ideal for prototyping with Arduino, ESP32 and Raspberry P

€0,00

Arduino Uno R4 WiFi

The Arduino Uno R4 WiFi with 32-bit Renesas RA4M1 and ESP32-S3 for WiFi and Bluetooth. Built-in 12x8 LED matrix. USB-C c

€0,00

Micro-HDMI to HDMI cable 1 m

Micro-HDMI (type D) to HDMI (type A) cable, 1 metre, 4K60 capable. Required to connect a Raspberry Pi 4 or 5 to a monito

€0,00

Raspberry Pi 5 case with fan (official)

Official red/white case for the Raspberry Pi 5 with integrated temperature-controlled fan and heatsink. Pi not included.

€0,00

Raspberry Pi 27W USB-C power supply (official)

Official 27W USB-C PD power supply for the Raspberry Pi 5. Delivers 5.1V / 5A so all USB ports can be fully loaded. EU p

€0,00

Raspberry Pi 5 – 8GB

The latest Raspberry Pi 5 with 8GB RAM, quad-core Cortex-A76 at 2.4 GHz, dual 4K HDMI, PCIe 2.0 and USB 3.0. Note: power

€0,00

Monday:
Tuesday:
Wednesday:
Thursday:
Friday:
Saturday:
Sunday: